Ssh Client; Configuring Tcp/Udp Services - Cisco Small Business 200 Series Administration Manual

Security

SSH Client

STEP 5
The Details button displays the certificate and RSA key pair. This is used to copy the certificate and RSA
key-pair to another device (using copy/paste). When you click Display Sensitive Data as Encrypted, the
private keys are displayed in encrypted form.
SSH Client
See Security: SSH Client.

Configuring TCP/UDP Services

The TCP/UDP Services page enables TCP or UDP-based services on the device, usually for security
reasons.
The device offers the following TCP/UDP services:
• HTTP—Enabled by factory default
• HTTPS—Enabled by factory default
• SNMP—Disabled by factory default
The active TCP connections are also displayed in this window.
To configure TCP/UDP services:
STEP 1
STEP 2
• HTTP Service—Indicates whether the HTTP service is enabled or disabled.
• HTTPS Service—Indicates whether the HTTPS service is enabled or disabled.
• SNMP Service—Indicates whether the SNMP service is enabled or disabled.
STEP 3
Cisco Small Business 200 Series Smart Switch Administration Guide
Click Display Sensitive Data as Encrypted to display this key as encrypted.
When this button is clicked, the private keys are written to the configuration file in
encrypted form (when Apply is clicked). When the text is displayed in encrypted
form, the button becomes Display Sensitive Data as Plaintext enabling you to
view the text in plaintext again.
Click Security > TCP/UDP Services.
Enable or disable the following TCP/UDP services on the displayed services.
Click Apply. The services are written to the Running Configuration file.
19
258