Administration: Discovery
Configuring LLDP
To define an LLDP MED network policy:
STEP 1
This page contains previously-created network policies.
STEP 2
When this box is checked, you may not manually configure a voice network policy.
NOTE
STEP 3
STEP 4
STEP 5
•
Network Policy Number—Select the number of the policy to be created.
•
Application—Select the type of application (type of traffic) for which the network policy is being
defined.
•
VLAN ID—Enter the VLAN ID to which the traffic must be sent.
•
VLAN Type—Select whether the traffic is Tagged or Untagged.
•
User Priority—Select the traffic priority applied to traffic defined by this network policy. This is the
CoS value.
•
DSCP Value—Select the DSCP value to associate with application data sent by neighbors. This
informs them how they must mark the application traffic they send to the device.
STEP 6
You must manually configure the interfaces to include the desired manually-defined network
NOTE
policies for the outgoing LLDP packets using the LLDP MED Port Settings.
Cisco Small Business 200 Series Smart Switch Administration Guide
Click Administration > Discovery - LLDP > LLDP MED Network Policy.
Select Auto for LLDP-MED Network Policy for Voice Application if the device is to
automatically generate and advertise a network policy for voice application based
on the voice VLAN maintained by the device.
Click Apply to add this setting to the Running Configuration file.
To define a new policy, click Add.
Enter the values:
Click Apply. The network policy is defined.
9
91