Cisco Small Business 200 Series Administration Manual page 48

Administration: File Management
Copy/Save Configuration
The following combinations of copying internal file types are allowed:
• From the Running Configuration to the Startup Configuration or Backup Configuration.
• From the Startup Configuration to the Running Configuration, Startup Configuration or Backup
Configuration.
• From the Backup Configuration to the Running Configuration, Startup Configuration or Backup
Configuration.
• From the Mirror Configuration to the Running Configuration, Startup Configuration or Backup
Configuration.
To copy one type of configuration file to another type of configuration file:
STEP 1
STEP 2
STEP 3
STEP 4
- Exclude—Sensitive data is not included in the backup file.
- Encrypted—Sensitive data is included in the backup file in encrypted form.
- Plaintext—Sensitive data is included in the backup file in plain text.
The available sensitive data options are determined by the current user SSD rules. For details,
NOTE
refer to Secure Sensitive Data Management > SSD Rules page.
STEP 5
STEP 6
Cisco Small Business 200 Series Smart Switch Administration Guide
Click Administration > File Management > Copy/Save Configuration.
Select the Source File Name to be copied. Only valid file types are displayed
(described in the Files and File Types
Select the Destination File Name to be overwritten by the source file.
Select the Sensitive Data option if you are backing up a configuration file, select
one of the following formats for the backup file.
The Save Icon Blinking field indicates whether an icon blinks when there is
unsaved data. To disable/enable this feature, click Disable/Enable Save Icon
Blinking.
Click Apply. The file is copied.
section).
5
47