Administration: Discovery
Configuring LLDP
•
LLDP Status—LLDP publishing option.
•
LLDP MED Status—Enabled or disabled.
•
Local PoE—Local PoE information advertised.
•
Remote PoE—PoE information advertised by the neighbor.
•
# of neighbors—Number of neighbors discovered.
•
Neighbor Capability of 1st Device—Displays the primary functions of the neighbor; for example:
Bridge or Router.
LLDP Local Information
To view the LLDP local port status advertised on a port:
STEP 1
STEP 2
This page displays the following fields for the selected interface:
Global
•
Chassis ID Subtype—Type of chassis ID. (For example, the MAC address.)
•
Chassis ID—Identifier of chassis. Where the chassis ID subtype is a MAC address, the MAC address
of the device appears.
•
System Name—Name of device.
•
System Description—Description of the device (in alpha-numeric format).
•
Supported System Capabilities—Primary functions of the device, such as Bridge, WLAN AP, or
Router.
•
Enabled System Capabilities—Primary enabled function(s) of the device.
•
Port ID Subtype—Type of the port identifier that is shown.
•
Port ID—Identifier of port.
•
Port Description—Information about the port, including manufacturer, product name and hardware/
software version.
Cisco Small Business 200 Series Smart Switch Administration Guide
Click Administration > Discovery - LLDP > LLDP Local Information.
Select the interface for which LLDP local information is to be displayed.
9
94