Administration: Discovery
Configuring LLDP
•
Auto-Negotiation Advertised Capabilities—Port speed auto-negotiation capabilities, for example,
1000BASE-T half duplex mode, 100BASE-TX full duplex mode.
•
Operational MAU Type—Medium Attachment Unit (MAU) type. The MAU performs physical layer
functions, including digital data conversion from the Ethernet interfaces' collision detection and bit
injection into the network; for example, 100BASE-TX full duplex mode.
802.3 Power via MDI
•
MDI Power Support Port Class—Advertised power support port class.
•
PSE MDI Power Support—Indicates if MDI power is supported on the port.
•
PSE MDI Power State—Indicates if MDI power is enabled on the port.
•
PSE Power Pair Control Ability—Indicates if power pair control is supported on the port.
•
PSE Power Pair—Power pair control type supported on the port.
•
PSE Power Class—Advertised power class of the port.
802.3 Details
•
802.3 Maximum Frame Size—Advertised maximum frame size that is supported on the port.
802.3 Link Aggregation
•
Aggregation Capability—Indicates if the port can be aggregated.
•
Aggregation Status—Indicates if the port is currently aggregated.
•
Aggregation Port ID—Advertised aggregated port ID.
802.3 Energy Efficient Ethernet (EEE)
•
Remote Tx—Indicates the time (in micro seconds) that the transmitting link partner waits before it
starts transmitting data after leaving Low Power Idle (LPI mode).
•
Remote Rx—Indicates the time (in micro seconds) that the receiving link partner requests that the
transmitting link partner waits before transmission of data following Low Power Idle (LPI mode).
•
Local Tx Echo—Indicates the local link partner's reflection of the remote link partner's Tx value.
•
Local Rx Echo—Indicates the local link partner's reflection of the remote link partner's Rx value.
MED Details
•
Capabilities Supported—MED capabilities enabled on the port.
•
Current Capabilities—MED TLVs advertised by the port.
Cisco Small Business 200 Series Smart Switch Administration Guide
9
99