VLAN Management
Voice VLAN
Voice VLAN Configuration
This section describes how to configure voice VLAN. It covers the following topics:
•
Configuring Voice VLAN Properties
•
Auto Voice VLAN Settings
•
Telephony OUI
Configuring Voice VLAN Properties
Use the Voice VLAN Properties page for the following:
•
View how voice VLAN is currently configured.
•
Configure the VLAN ID of the Voice VLAN.
•
Configure voice VLAN QoS settings.
•
Configure the voice VLAN mode (Telephony OUI or Auto Voice VLAN).
•
Configure how Auto Voice VLAN is triggered.
To view and configure Voice VLAN properties:
STEP 1
•
The voice VLAN settings configured on the device are displayed in the Voice VLAN Settings
(Administrative Status) block.
•
The voice VLAN settings that are actually being applied to the voice VLAN deployment are displayed
in the Voice VLAN Settings (Operational Status) block.
STEP 2
•
Voice VLAN ID—Enter the VLAN that is to be the Voice VLAN.
Changes in the voice VLAN ID, CoS/802.1p, and/or DSCP cause the device to advertise the
NOTE
administrative voice VLAN as a static voice VLAN. If the option
by external Voice VLAN is selected, then the default values need to be maintained.
•
CoS/802.1p —Select a CoS/802.1p value that to be used by LLDP-MED as a voice network policy.
Administration > Discovery > LLDP > LLDP MED Network Policy
Refer to
•
DSCP—Selection of DSCP values that to be used by the LLDP-MED as a voice network policy. Refer
Administration > Discovery > LLDP > LLDP MED Network Policy
to
•
Dynamic Voice VLAN—Select this field to disable or enable voice VLAN feature in one of the
following ways:
Cisco Small Business 200 Series Smart Switch Administration Guide
Click VLAN Management > Voice VLAN > Properties.
Enter values for the following fields:
Auto Voice VLAN Activation
for additional details.
for additional details.
14
triggered
192