Snmp Notification Filters - Cisco Small Business 200 Series Administration Manual

SNMP

SNMP Notification Filters

SNMP Notification Filters
The Notification Filter page enables configuring SNMP notification filters and Object IDs (OIDs) that are
checked. After creating a notification filter, it is possible to attach it to a notification recipient in the
Notification Recipients SNMPv1,2 page, and Notification Recipients SNMPv3 page.
The notification filter enables filtering the type of SNMP notifications that are sent to the management
station based on the OID of the notification to be sent.
To define a notification filter:
STEP 1
The Notification Filter page contains notification information for each filter. The table is able to filter
notification entries by Filter Name.
STEP 2
STEP 3
• Filter Name—Enter a name between 0-30 characters.
• Object ID Subtree—Select the node in the MIB tree that is included or excluded in the selected SNMP
filter. The options to select the object are as follows:
- Select from list—Enables you to navigate the MIB tree. Press the Up arrow to go to the level of the
selected node's parent and siblings; press the Down arrow to descend to the level of the selected
node's children. Click nodes in the view to pass from one node to its sibling. Use the scrollbar to
bring siblings in view.
- If Object ID is used, the entered object identifier is included in the view if the Include in filter
option is selected.
STEP 4
STEP 5
Cisco Small Business 200 Series Smart Switch Administration Guide
Click SNMP > Notification Filter.
Click Add.
Enter the parameters.
Select or deselect Include in filter. If this is selected, the selected MIBs are
included in the filter, otherwise they are excluded.
Click Apply. The SNMP views are defined and the running configuration is
updated.
24
335