Administration: Time Settings
Configuring System Time
•
Time Zone Acronym—Enter a name that will represent this time zone. This acronym appears in the
Actual Time field.
Daylight Savings Settings—Select how DST is defined:
•
Daylight Savings—Select to enable Daylight Saving Time.
•
Time Set Offset—Enter the number of minutes offset from GMT ranging from 1—1440. The default is
60.
•
Daylight Savings Type—Click one of the following:
USA
-
—DST is set according to the dates used in the USA.
European
-
—DST is set according to the dates used by the European Union and other countries that
use this standard.
By dates
-
—DST is set manually, typically for a country other than the USA or a European country.
Enter the parameters described below.
Recurring
-
—DST occurs on the same date every year.
By Dates
Selecting
-
From—Day and time that DST starts.
-
To—Day and time that DST ends.
Recurring
Selecting
•
From—Date when DST begins each year.
Day
-
—Day of the week on which DST begins every year.
Week
-
—Week within the month from which DST begins every year.
Month
-
—Month of the year in which DST begins every year.
Time
-
—The time at which DST begins every year.
•
To—Date when DST ends each year. For example, DST ends locally every fourth Friday in October at
5:00 am. The parameters are:
Day
-
—Day of the week on which DST ends every year.
-
Week
—Week within the month from which DST ends every year.
Month
-
—Month of the year in which DST ends every year.
Time
-
—The time at which DST ends every year.
Cisco Small Business 200 Series Smart Switch Administration Guide
allows customization of the start and stop of DST:
allows different customization of the start and stop of DST:
7
72