Configuring Priority Mapping Tables - HP V1910 Switch Series User Manual

Table 172 describes the configuration items of configuring line rate on a port.
Table 172 Configuration items of configuring line rate on a port
Item
Please select an interface type
Rate Limit
Direction
CIR
Please select port(s)
Return to Line rate configuration task

Configuring priority mapping tables

Select QoS > Priority Mapping from the navigation tree to enter the page shown in
Figure 407 The page for configuring priority mapping tables
Table 170 describes the configuration items of configuring priority mapping tables.
Table 173 Configuration items of configuring priority mapping tables
Item
Mapping Type
Input Priority Value
Output Priority Value
Restore
Description
Select the types of interfaces to be configured with line rate.
The interface types available for selection depend on your device
model.
Enable or disable line rate on the specified port.
Select a direction in which the line rate is to be applied.

Inbound—Limits the rate of packets received on the specified port.

Outbound—Limits the rate of packets sent by the specified port.

Both—Limits the rate of packets received on and sent by the
specified port.
Set the committed information rate (CIR), the average traffic rate.
Specify the ports to be configured with line rate
Click the ports to be configured with line rate in the port list. You can
select one or more ports.
list.
Description
Select the priority mapping table to be configured, which can be CoS
to DSCP, CoS to Queue, DSCP to CoS, DSCP to DSCP, or DSCP to
Queue. For example, select DSCP to DSCP mapping type to enter the
page shown in Table 174.
Set the output priority value for an input priority value.
Click Restore to display the default settings of the current priority
mapping table on the page.
To restore the priority mapping table to the default, click Apply.
435
Figure 407.