HP V1910 Switch Series User Manual page 379

Figure 336 Configure the RADIUS accounting server
 Select Accounting Server as the server type.
Enter 10.1 10.91.146 as the IP address of the primary accounting server.

Enter 1813 as the UDP port of the primary accounting server.

Select active as the primary server status.

Click Apply.

# Configure the parameters for communication between the switch and the RADIUS servers.
 Select the RADIUS Setup tab.
Figure 337 Configure RADIUS parameters
Select extended as the server type.

Select the Authentication Server Shared Key check box and enter expert in the text box.

Enter expert in the Confirm Authentication Shared Key text box.

Select the Accounting Server Shared Key check box and enter expert in the text box.
