HP V1910 Switch Series User Manual page 250

Figure 199 The Global Setup tab
 Select Enable from the LLDP Enable drop-down list.
Click Apply.

Configure Switch B
2.
# Enable LLDP on port GigabitEthernet 1/0/1. (Optional. By default, LLDP is enabled on Ethernet ports.)
# Set the LLDP operating mode to Tx on GigabitEthernet 1/0/1.
Select Network > LLDP from the navigation tree to enter the Port Setup tab, as shown in

Click the icon for port GigabitEthernet 1/0/1. The page shown in
Figure 200 The Port Setup tab
236
Figure 200.
Figure 201 is displayed.