HP V1910 Switch Series User Manual page 209

Figure 172 The Region tab
Click Modify to enter the page shown in

Figure 173 Configure an MST region
 Type the region name example.
Set the revision level to 0.

Select the Manual option.

Select 1 in the Instance ID drop-down list.

Type the VLAN ID 10.

Click Apply to map VLAN 10 to MSTI 1 and add the VLAN-to-MSTI mapping entry to the

VLAN-to-MSTI mapping list.
Repeat the previous steps to map VLAN 20 to MSTI 2 and VLAN 30 to MSTI 3, and add the

VLAN-to-MSTI mapping entries to the VLAN-to-MSTI mapping list.
Click Activate.

# Configure MSTP globally.
Select Network > MSTP from the navigation tree, and click the Global tab to enter the page shown

in Figure 174.
Figure 173.
195