Link Aggregation And Lacp Configuration Example - HP V1910 Switch Series User Manual

Field/button
Inactive Reason
Partner Port
Partner Port State
Oper Key
Table 87 describes the fields in the Partner Port Details table
Table 87 Fields in the Partner Port Details table
Field
Unit
Port
Partner ID
Partner Port Priority
Partner Oper Key
Return to Dynamic aggregation group configuration task

Link aggregation and LACP configuration example

Network requirements
As shown in
Ethernet ports GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3.
Aggregate the ports on each device to form a link aggregation group, thus balancing
incoming/outgoing traffic across the member ports.
Description
Reason code indicating why a port is inactive (that is, unselected) for
receiving/transmitting user data. For the meanings of the reason codes, see the
bottom of the page shown in
Name of the peer port.
State information of the peer port, represented by letters A through H.

A indicates that LACP is enabled.

B indicates that LACP short timeout has occurred. If B does not appear, it
indicates that LACP long timeout has occurred.

C indicates that the link is considered as aggregatable by the sending system.

D indicates that the link is considered as synchronized by the sending system.

E indicates that the sending system considers that collection of incoming
frames is enabled on the link.

F indicates that the sending system considers that distribution of outgoing
frames is enabled on the link.

G indicates that the receive state machine of the sending system is using the
default operational partner information.

H indicates that the receive state machine of the sending system is in the
expired state.
Operational key of the local port
Figure 180, Switch A and Switch B are connected to each other through their Layer 2
Figure 179.
Description
Number of the remote system
Name of the remote port
LACP priority and MAC address of the remote system
LACP priority of the remote port
Operational key of the remote port.
list.
209