Viewing The Operation Parameters Of A Port - HP V1910 Switch Series User Manual

Item
Selected Ports

Viewing the operation parameters of a port

Select Device > Port Management from the navigation tree. The Summary tab is displayed by default.
Select the parameter you want to view by clicking the radio button before it to display the setting of this
parameter for all the ports in the lower part of the page, as shown in
Figure 52 The
Select Device > Port Management from the navigation tree, select the Details tab on the page that
appears, and then click the port whose operation parameters you want to view in the chassis front panel,
as shown in Figure
part of the page (in the square brackets).
Description
Port or ports that you have selected from the chassis front panel and the
aggregate interface list below, for which you have set operation parameters
IMPORTANT:

Only in the presence of link aggregations groups, Aggregation ports will
be displayed under the chassis front panel.

You can set only the state and MAC learning limit for an aggregate
interface.
Summary tab
53. The operation parameter settings of the selected port are displayed on the lower
69
Figure 52.