HP V1910 Switch Series User Manual page 144

V1910 switch series
Hide thumbs Also See for V1910 Switch Series:
Table of Contents

Advertisement

CAUTION:
The configuration on NMS must be consistent with that on the agent. Otherwise, you cannot perform
corresponding operations.
SNMPv3 adopts a security mechanism of authentication and privacy. You must configure username and
security level. According to the configured security level, you must configure the related authentication
mode, authentication password, privacy mode, privacy password, and so on.
You must also configure the aging time and retry times. After these configurations, you can configure the
device as needed through the NMS. For more information about NMS configuration, see the manual
provided for NMS.
Configuration verification
After the above configuration, the NMS can establish an SNMP connection with the agent and
query and reconfigure values of objects in the agent MIB.
If an idle interface on the agent is shut down or brought up, the NMS receives a trap information
sent by the agent.
130

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1910 seriesV1910-24g-poe (170w)V1910-24g-poe (365w)

Table of Contents