Configuring Priority Mapping Tables - HP 1910 User Manual

Figure 493 Configuring rate limit on a port
3. Configure rate limit on a port as described in
4. Click Apply.
Table 155 Configuration items
Item
Please select an interface type
Rate Limit
Direction
CIR
Please select port(s)

Configuring priority mapping tables

1. Select QoS > Priority Mapping from the navigation tree to enter the priority mapping configuration
page.
Table
Description
Select the types of interfaces to be configured with rate limit.
Enable or disable rate limit on the specified port.
Select a direction to which the rate limit is to be applied.
•
Inbound—Limits the rate of packets received on the specified port.
•
Outbound—Limits the rate of packets sent by the specified port.
Set the committed information rate (CIR), the average traffic rate.
Specify the ports to be configured with rate limit
Click the ports to be configured with rate limit in the port list. You can select
one or more ports.
515
155.