HP V1910 Switch Series User Manual page 253

Figure 204 Network diagram for CDP-compatible LLDP configuration
Configuration procedure
# Create VLAN 2.
Select Network > VLAN from the navigation bar and click the Create tab to enter the page shown

in Figure
Figure 205 The page for creating VLANs
Type 2 in the VLAN IDs field.

Click Create.

# Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as trunk ports.
Select Device > Port Management from the navigation bar and click the Setup tab to enter the page

shown in
205.
Figure 206.
239