Configuring Priority Mapping Tables - HP 1910 User Manual

Figure 473 Configuring line rate on a port
Configure line rate on a port as described in
3.
Click Apply.
4.
Table 156 Configuration items
Item
Please select an interface type
Rate Limit
Direction
CIR
Please select port(s)

Configuring priority mapping tables

Select QoS > Priority Mapping from the navigation tree to enter the priority mapping configuration
1.
page.
Table
Description
Select the types of interfaces to be configured with line rate.
Enable or disable line rate on the specified port.
Select a direction in which the line rate is to be applied.
•
Inbound—Limits the rate of packets received on the specified port.
•
Outbound—Limits the rate of packets sent by the specified port.
Set the committed information rate (CIR), the average traffic rate.
Specify the ports to be configured with line rate
Click the ports to be configured with line rate in the port list. You can select one
or more ports.
461
156.