Item
Finishing configuration wizard
After finishing the management IP address configuration, click Next, as shown in
Figure 19 Configuration finishes
The page displays your configurations. Review the configurations and if you want to modify the settings
click Back to go back to the page. Click Finish to confirm your settings and the system performs the
configurations.
Description
through BOOTP.
Manual: Allows you to specify an IPv4 address and a mask length.
Manual
IMPORTANT:
Support for IPv4 obtaining methods depends on the device model.
IPv4
Specify an IPv4 address and the mask length for the VLAN interface.
address
These two text boxes are configurable if Manual is selected.
MaskLen
31
Figure
19.