HP V1910 Switch Series User Manual page 355

Figure 313 802.1X configuration of GigabitEthernet 1/0/1
Select GigabitEthernet1/0/1 from the port list.

Click Apply to finish the operation.

Configuration verification
# After the user passes authentication and gets online, use the ping command to test whether ACL 3000
takes effect.
From the navigation tree, select Network > Diagnostic Tools. The ping page appears.

Enter the destination IP address 10.0.0.1.

 Click Start to start the ping operation.
Figure 314

Figure 314 Ping operation summary
shows the ping operation summary.
341