HP V1910 Switch Series User Manual page 349

 Enter the primary server IP address 10.1.1.2.
Enter the primary server UDP port number 1813.

Select active as the primary server status.

 Click Apply to finish the operation.
# Configure the scheme to be used for communication between the switch and the RADIUS servers.
 Select the RADIUS Setup tab to enter the RADIUS parameter configuration page.
Figure 304 RADIUS parameter configuration
Select extended as the server type.

Select the Authentication Server Shared Key checkbox, and enter abc in the textbox.

 Enter abc again in the Confirm Authentication Shared Key textbox.
Select the Accounting Server Shared Key checkbox, and enter abc in the textbox.

Enter abc again in the Confirm Accounting Shared Key textbox.

Select without-domain as the username format.

 Click Apply to finish the operation.
Configure AAA
3.
# Create an ISP domain.
From the navigation tree, select Authentication > AAA. The domain setup page appears.

335