HP V1910 Switch Series User Manual page 354

 In the IP Address Filter area, select the Destination IP Address check box, and enter 10.0.0.1 in the
text box.
 Enter 0.0.0.0 in the Destination Wildcard text box.
Click Add to finish the operation.

Configure the 802.1X feature.
5.
# Enable the 802.1X feature globally.
From the navigation tree, select Authentication > 802.1X to enter the 802.1X configuration page.

Figure 312 Global 802.1X globally
Select the check box before Enable 802.1X.

 Select the authentication method as CHAP.
Click Apply to finish the operation.

# Enable 802.1X on port GigabitEthernet 1/0/1.
 In the Ports With 802.1X Enabled area, click Add.
340