Configuring Radius Parameters - HP V1910 Switch Series User Manual

Item
Secondary Server UDP Port
Secondary Server Status
Return to RADIUS configuration task

Configuring RADIUS parameters

From the navigation tree, select Authentication > RADIUS and then select the RADIUS Setup tab to enter
the RADIUS parameter configuration page, as shown in
Figure 333 RADIUS parameter configuration
Description
Specify the UDP port of the secondary server.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the port number is 1812 for authentication or 1813
for accounting.
Status of the secondary server, including:

active: The server is working normally.

blocked: The server is down.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the status is blocked.
list.
Figure 333.