Configuring An Snmp Group - HP V1910 Switch Series User Manual

Table 44 Configuration items for configuring an SNMP community
Item
Community Name
Access Right
View
ACL
Return to SNMPv1 or SNMPv2c configuration task

Configuring an SNMP group

Select Device > SNMP from the navigation tree.
1.
Click the Group tab to enter the page as shown in
2.
Click Add to enter the Add SNMP Group page as shown in
3.
Figure 104 SNMP group
Figure 105 Create an SNMP group
Description
Set the SNMP community name.
Configure SNMP NMS access right

Read only—The NMS can perform read-only operations to the MIB objects when it
uses this community name to access the agent,

Read and write—The NMS can perform both read and write operations to the MIB
objects when it uses this community name to access the agent.
Specify the view associated with the community to limit the MIB objects that can be
accessed by the NMS.
Associate the community with a basic ACL to allow or prohibit the access to the agent
from the NMS with the specified source IP address.
121
list.
Figure 104.
Figure 105.