Displaying Information About Pse And Poe Ports; Poe Configuration Example - HP V1910 Switch Series User Manual

Displaying information about PSE and PoE ports

Select PoE > PoE from the navigation tree to enter the page of the Summary tab. The upper part of the
page displays the PSE summary. Click a port on the chassis front panel, and the configuration and power
information are displayed in the lower part of the page, as shown in
Figure 426 PoE summary (with GigabitEthernet 1/0/1 selected)

PoE configuration example

Network requirements
As shown in

telephones.
GigabitEthernet 1/0/1 1 is connected to the AP whose maximum power does not exceed 9000

milliwatts.
The IP telephones have a higher power supply priority than the AP, so the PSE supplies power to IP

telephones first when the PSE power is overloaded.
Figure 427 Network diagram for PoE
Figure 427, GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are connected to IP
PSE
GE1/0/11
GE1/0/1
GE1/0/2
AP
452
Figure 426.