Energy Saving Configuration; Overview; Configuring Energy Saving On A Port - HP V1910 Switch Series User Manual

Energy saving configuration

Overview

Energy saving allows you to configure a port to work at the lowest transmission speed, disable PoE, or go
down during a specified time range on certain days of a week. The port resumes working normally when
the effective time period ends.

Configuring energy saving on a port

Select Device > Energy Saving from the navigation tree to enter the energy saving configuration page, as
shown in Figure
Figure 94 Energy saving configuration page
Table 39 Configuration items for configuring energy saving on a port
Item
Time Range
Sun through Sat
PoE Disabled
94. You can select a port and configure an energy saving policy for the port.
Description
Set the time period when the port is in the state of energy saving.
IMPORTANT:

Up to five energy saving policies with different time ranges can be configured on a
port.

Specify the start time and end time in units of 5 minutes, such as 08:05 to 10:15.
Otherwise, the start time will be postponed and the end time will be brought
forward so that they meet the requirements. For example, if you set the time range
to 08:08 to 10:12, however, the effective time range is actually 08:10 to 10:10.
Disable PoE on the port.
112