Authorized Ip Configuration; Overview; Configuring Authorized Ip - HP V1910 Switch Series User Manual

Authorized IP configuration

Overview

The authorized IP function is to associate the HTTP or Telnet service with an ACL to filter the requests of
clients. Only the clients that pass the ACL filtering can access the device.

Configuring authorized IP

Select Security > Authorized IP from the navigation tree, and then click the Setup tab to enter the
authorized IP configuration page, as shown in
Figure 377 Authorized IP configuration page
Table 144 Authorized IP configuration items
Item
Telnet
Web
(HTTP)
Description
Associate the Telnet service with an IPv4 ACL.
IPv4 ACL
You can configure the IPv4 ACL to be selected by selecting QoS > ACL IPv4.
Associate the Telnet service with an IPv6 ACL.
IPv6 ACL( Not
Supported )
You can configure the IPv6 ACL to be selected by selecting QoS > ACL IPv6.
Associate the HTTP service with an IPv4 ACL.
IPv4 ACL
You can configure the IPv4 ACL to be selected by selecting QoS > ACL IPv4.
Figure 377.
397