HP V1910 Switch Series User Manual page 404

Figure 365 Configure a PKI domain
Type torsa as the PKI domain name.

 Type myca as the CA identifier.
Select aaa as the local entity.

Select CA as the authority for certificate request.

 Type http://4.4.4.133:446/c95e970f632d27be5e8cbf80e971d9c4a9a93337 as the URL for
certificate request. The URL must be in the format of http://host:port/Issuing Jurisdiction ID, where
Issuing Jurisdiction ID is the hexadecimal string generated on the CA.
Select Manual as the certificate request mode.

 Click Display Advanced Config to display the advanced configuration items.
Select the Enable CRL Checking check box.

Type http://4.4.4.133:447/myca.crl as the CRL URL.

 Click Apply. A dialog box appears, asking "Fingerprint of the root certificate not specified. No root
certificate validation will occur. Continue?" Click OK.
# Generate an RSA key pair.
Select the Certificate tab, and then click Create Key, as shown in

configuration as shown in Figure 367.
390
Figure 366, and perform the