Authorized Ip Configuration Example - HP V1910 Switch Series User Manual

Authorized IP configuration example

Authorized IP configuration example
Network requirements
In Figure 378, configure Switch to deny Telnet and HTTP requests from Host A, and permit Telnet and
HTTP requests from Host B.
Figure 378 Network diagram for authorized IP
Configuration procedure
# Create an ACL.
 Select QoS > ACL IPv4 from the navigation tree and then click the Create tab to enter the ACL
configuration page shown in
 Type 2001 for ACL Number.
Click Apply.

Figure 379 Create an ACL
# Configure an ACL rule to permit Host B.
 Click the Basic Setup tab to enter the page shown in
Select 2001 from the Select Access Control List (ACL) drop-down list.

Figure 379.
398
Figure 380.