HP V1910 Switch Series User Manual page 236

V1910 switch series
Hide thumbs Also See for V1910 Switch Series:
Table of Contents

Advertisement

Table 95 Port LLDP configuration items
Item
Interface Name
LLDP State
LLDP Operating Mode
Encapsulation Format
Basic Settings
CDP Operating Mode
LLDP Polling Interval
LLDP Trapping
Base TLV
Port Description
Settings
Description
Displays the name of the port or ports you are configuring.
Displays the LLDP enabling status on the port you are
configuring.
This field is not available when you batch-configure ports.
Set the LLDP operating mode on the port or ports you are
configuring:
TxRx—Sends and receives LLDPDUs.
Tx—Sends but not receives LLDPDUs.
Rx—Receives but not sends LLDPDUs.
Disable—Neither sends nor receives LLDPDUs.
Set the encapsulation for LLDPDUs:
ETHII—Encapsulates outgoing LLDPDUs in Ethernet II frames
and processes an incoming LLDPDU only if its encapsulation
is Ethernet II.
SNAP—Encapsulates outgoing LLDPDUs in Ethernet II frames
and processes an incoming LLDPDU only if its encapsulation
is Ethernet II.
IMPORTANT:
LLDP-CDP PDUs use only SNAP encapsulation.
Set the CDP compatibility of LLDP:
Disable—Neither sends nor receives CDPDUs.
TxRx—Sends and receives CDPDUs.
IMPORTANT:
To enable LLDP to be compatible with CDP on the port, you must
enable CDP compatibility on the Global Setup tab and set the
CDP operating mode on the port to TxRx.
Enable LLDP polling and set the polling interval.
If no polling interval is set, LLDP polling is disabled.
With the polling mechanism, LLDP periodically detects local
configuration changes. If a configuration change is detected,
an LLDPDU is sent to inform the LLDP neighbors of the change.
Set the enable status of the LLDP trapping function on the port or
ports.
LLDP trapping is used to report to the network management
station critical events such as new neighbor devices detected
and link failures.
IMPORTANT:
To avoid excessive traps from being sent when topology is
instable, you can tune the minimum trap transit interval on the
Global Setup tab.
Select to include the port description TLV in transmitted
LLDPDUs.
222

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1910 seriesV1910-24g-poe (170w)V1910-24g-poe (365w)

Table of Contents