Item
Secondary
Method
Return to
Configuration task
AAA configuration example
Network requirements
As shown in
accounting for Telnet users.
Figure 321 Network diagram for AAA configuration example
Configuration procedure
NOTE:
Enable the Telnet server function on the switch and configure the switch to use AAA for Telnet users. The
configuration steps are omitted.
# Configure IP addresses for the interfaces. (Omitted)
# Configure a local user.
Select Device > Users from the navigation tree and then select the Create tab, as shown in
322.
Description
None—Performs no accounting.
RADIUS—Performs RADIUS accounting. You must specify the RADIUS scheme to be
used.
Not Set—Uses the default accounting methods.
list.
Figure
321, configure the switch to perform local authentication, authorization, and
349
Figure