Transport And Lifting Instructions - Genie S-60 TRAX Operator's Manual

First Edition • Second Printing
Pictures in this manual may show a boom with
tires and wheels instead of tracks. All safety
information and operating instructions still apply to
the S-60 TRAX and the S-65 TRAX, even if the
picture does not show the tracks.
Observe and Obey:

Genie provides this securement information as
a recommendation. Drivers are solely
responsible for making sure machines are
properly secured and the correct trailer is
selected pursuant to US Department of
Transportation regulations, other localized
regulations, and their company policy.

Genie customers needing to containerize any
lift or Genie product should source a qualified
freight forwarder with expertise in preparing,
loading and securing construction and lifting
equipment for international shipment.

Only qualified mobile elevating work platform
operators should move the machine on, or off
the truck.

The transport vehicle must be parked on a
level surface.

The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.

Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. Genie lifts are very heavy
relative to their size. See the serial label for the
machine weight.
Part No. 1286582GT

Transport and Lifting Instructions

® ™
S -60 XC • S®-65 XC™ • S

Be sure the turntable is secured with the
turntable rotation lock before transporting. Be
sure to unlock the turntable for operation.

Do not drive the machine on a slope that
exceeds the uphill, downhill or side slope
rating. See Driving on a Slope in the Operating
Instructions section.

If the slope of the transport vehicle bed
exceeds the maximum slope rating, the
machine must be loaded and unloaded using a
winch as described in the brake release
operation.
Free-wheel Configuration for
Winching
Chock the wheels or tracks to prevent the machine
from rolling.
Release the wheel or track
brakes by turning over all
four drive hub disconnect
caps.
Be sure the winch line is
properly secured to the
drive chassis tie points and
the path is clear of all
obstructions.
Reverse the procedures described to re-engage
the brakes.
Note: The pump free-wheel valve should always
remain closed.
® TRAX
-60 ™ • S®-65 TRAX™
Operator's Manual
55