To Set Gatm Dip Switches - Nortel BCM50 3.0 Installation And Maintenance Manual

Table 19 GASM dip switch settings (switch 4–8)
Switches 4 to 8 select the region for the GASM as follows:
North America
United Kingdom
Australia
Poland
3 After you set the switches, proceed to
page 100.

To set GATM dip switches

1 For the dip switches on the left side at the rear of the module, set all switches to on.
2 For the dip switches on the right side at the rear of the module (country profile switches), set
all switches to off. The GATM downloads the country profiles automatically.
3 After you set the switches, proceed to
page 100.
Switch 4 Switch 5
OFF OFF
OFF OFF
OFF OFF
OFF OFF
Installing a media bay module in an expansion unit
Installing a media bay module in an expansion unit
Chapter 8 Installing an expansion unit
Switch 6 Switch 7
OFF OFF
OFF OFF
OFF ON
OFF ON
Installation and Maintenance Guide
99
Switch 8
OFF
ON
OFF
ON
on
on