Changing A Pickup Group For A Set - Nortel Compact ICS 7.1 Coordinator Manual

Tip -
is also a member of a call pickup group can be picked up
by any telephone in that call pickup group. For more
information about Hunt Groups, see ''Programming Hunt
Groups'' on page 165.

Changing a pickup group for a set

Telephones can be put into and taken out of pickup groups.
1. Place the programming overlay over the appropriate buttons on your
two-line-display telephone.
Press ≤••¤flfl‹››.
2.
¤‹fl›fl
3. Press
Press ≠ and enter the internal number of the telephone you
4.
want to program.
Press ≠ twice.
5.
Press 'five times.
6.
Press CHANGE at Pickup grp: to assign the telephone to pickup group
7.
1, 2, 3, or 4, or to None.
Displays
Already joined
Pickup denied
N0130955 01
A Hunt Group call ringing at a Norstar set DN that
(the default System Coordinator password).
You are already connected to the telephone that
made the call you are trying to pick up. This can
happen if you are on a call to a co-worker, your
co-worker dials the number of a telephone in your
pickup group, and you attempt to pick up that call.
There is no call that you can pick up or the call
that was ringing has already been answered.
You have tried to pick up a call on someone
else's private line.
Answering calls / 55
Compact ICS 7.1 System Coordinator Guide