Startup Parameters Overview - Nortel BCM50 3.0 Installation And Maintenance Manual

Startup parameters overview

The startup parameters are the remaining required parameters that you cannot configure using
Telset Administration. You must configure these parameters using Element Manager or the
Startup Profile. See the table
Table 22 Startup parameters (Sheet 1 of 2)
Parameters
System:
• System name
System:
• System ID
Time:
• Date and Time source
• NTP server address
• Date and time
• Time zone
DHCP server:
• Use DHCP Server on
Integrated Router
• Enable/disable server
• IP domain name
• Primary DNS
• Secondary DNS
• Default gateway
IP Phones:
• Enable registration
• Enable global pwd
• Global pwd
• Auto-assign DNs
• Advertisement/Logo
SNMP Agent:
• Enable/disable SNMP
agent
• Minimum security
• SNMP version support
SNMP community:
• Community string
• Type of access
SNMP manager:
• Manager IP address
Startup parameters
Telset Administration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Chapter 12 Configuring the BCM50 system
on page 129 for a list of the startup parameters.
Element Manager
Configuration > System >
Identification
Configuration > System >
Keycodes
(View ID is set
automatically and cannot
be changed)
Configuration > System >
Date and Time
Configuration > Data
Services > DHCP Server >
General Settings tab
Configuration > Resources
> Telephony Resources >
IP & Application Sets
Configuration >
Administrator Access >
SNMP > General tab
Configuration >
Administrator Access >
SNMP > Community
Strings tab
Configuration >
Administrator Access >
SNMP > General tab
Installation and Maintenance Guide
129
Startup Profile
System
System
Time
DHCP Server
IP Telephones
SNMP Agent
SNMP Community
SNMP Manager