4
Configure the Cold Reset Telephony attributes. See the table
on page 141.
Table 24 Cold Reset Telephony attributes
Attribute
Region
Template
Start DN
5
Click OK.
To initialize voice mail
1
From the Configuration tab, click Applications folder to expand it.
2
Select Voice Messaging/Contact Center.
3
Click Launch CallPilot Manager.
The Quick Install Wizard form appears.
If your voice mail system is already initialized, you do not see the Quick Install Wizard.
Instead you see the CallPilot Manager: Main Menu Web page.
4
Configure the attributes on the Quick Install Wizard form.
For more information, see the CallPilot Manager Set Up and Operation Guide.
Configuring the startup parameters
Use the following procedures to configure the startup parameters for the BCM50 system using
Element Manager:
•
To enter a name for your system
•
To configure the date and time settings
•
To configure DHCP server settings
•
To configure IP Phones
•
To configure SNMP settings
•
To configure SNMP community strings
•
To configure the SNMP manager list
•
To create user accounts
To enter a name for your system
1
From the Configuration tab, click the System folder to expand it.
2
From the System folder, select Identification.
Chapter 14 Using Element Manager to set the basic parameters
Description
Specify the startup region.
Specify the startup template.
Specify the startup DN. The default is 221.
on page 141
on page 142
on page 142
on page 144
on page 145
on page 145
on page 146
on page 146
Cold Reset Telephony attributes
Installation and Maintenance Guide
141