Using Element Manager To Set The Basic Parameters - Nortel BCM50 3.0 Installation And Maintenance Manual

Chapter 14

Using Element Manager to set the basic parameters

The Element Manager application provides a computer-based client interface that can connect to
devices over an IP network and display the programming interface for that device.
You can use the latest Element Manager version to manage all previous BCM systems that require
Element Manager. You need only one instance of Element Manager on your computer.
Through Element Manager, you can configure all of the basic parameters:
• Configuring the initial parameters
• Configuring the startup parameters
For more information about using Element Manager, see the Administration Guide.
The figure Overview of using Element Manager
Manager to set the basic parameters.
Figure 61 Overview of using Element Manager
Chapter 14 Using Element Manager to set the basic parameters
on page 139
on page 141
on page 137 shows an overview of using Element
Installation and Maintenance Guide
137