Patch Panel; Wall-Mount Bracket - Nortel BCM50 3.0 Installation And Maintenance Manual

Patch panel

The BCM50 patch panel simplifies the connections of lines and extensions to the main unit. The
BCM50 patch panel installs into the rack-mount shelf in a standard equipment rack and connects
to the RJ-21 telephony connector with a user-supplied RJ-21 cable. See the figure
connectors on page 53.
Note: The four analog lines on the patch panel are only available with the standard main
units. The four analog lines are not available with the BRI series (b-series) main units.
Figure 19 Patch panel connectors
01 02 03 04

Wall-mount bracket

To wall-mount a BCM50 unit (main unit or expansion unit), you need a wall-mount bracket. The
wall-mount bracket is attached to the wall, and the unit is connected to the wall-mount bracket. If
the BCM50 system includes additional units, you need a wall-mount bracket for each unit.
Each wall-mount bracket includes a cable-management tray that you use to store and organize the
cables connected to the BCM50 units. See the figure
Figure 20 Wall-mount bracket
01 02 03 04 01 02
Chapter 2 Introducing the BCM50 hardware
03 04 05 06 07 08
Wall-mount bracket
Installation and Maintenance Guide
Patch panel
09 10 11 12
on page 53.
53