To Enter The Keycodes; Configuring The Initial Parameters - Nortel BCM50 3.0 Installation And Maintenance Manual

132 Chapter 13 Using Telset Administration to set the basic parameters

Configuring the initial parameters

Use the following procedures to configure the initial parameters for the BCM50 using Telset
Administration:
•

To enter the keycodes

• To configure the IP address
• To configure the modem
• To select the region
• To select the telephony startup template and start DN
• To initialize voice mail
• To create Telset user accounts
To enter the keycodes
1
Select Feature 9*8 from a two-line display telephone.
2
Enter the following user ID and password:
User ID: SETNNA
Password: CONFIG
The numerical values of the user ID and password are 738662 and 266344, respectively.
3 Press NEXT to scroll through the menu and select Feature Codes.
4
Press OK.
The system ID (SID) displays.
5 Press NEXT.
6
Enter your sequence ID.
7
Press NEXT to scroll through the list and perform one or both of the following tasks:
a To activate features, select Feature List.
• Press SHOW to view the available features.
• Use the soft keys to activate features for your system.
b To enter a new keycode, select Entitlement Code.
• Press SHOW to view the current keycode.
• Use the soft keys to modify the keycode for your system.
For more detailed information about retrieving and entering the keycode for your system, see
the Keycode Installation Guide.
NN40020-302
on page 132
on page 133
on page 133
on page 134
on page 134
on page 134
on page 134