Next Step - Nortel BCM50 3.0 Installation And Maintenance Manual

8 Press BACK. The Accounts screen appears.
9 Press NEXT. The password screen appears.
10 Press CHNGE to change the password.
11 Press NEXT to scroll through the list of available accounts.
12 Press CHNGE to change the password for the selected account.
13 Enter the new password for the account.
14 Enter the new password again to confirm it.
For more information about creating user accounts using Element Manager, see the procedure
create user accounts

Next step

After you configure the initial parameters using Telset Administration, you must configure the
startup parameters using Element Manager. For more information, see
parameters on page 141.
Chapter 13 Using Telset Administration to set the basic parameters
on page 146.
Configuring the startup
Installation and Maintenance Guide
135
To