To Configure The Mbm(S); Configuring The Media Bay Module - Nortel BCM50 3.0 Installation And Maintenance Manual

156 Chapter 16 Completing the initial installation (optional)
After the basic configuration finishes, you can further customize your system by using the
following configuration options:
•

Configuring the media bay module

• Configuring modem settings
• Checking for software updates
• Configuring voice mail
• Customizing security policies
• Performing a backup
Configuring the media bay module
For information about installing a media bay module (MBM) and setting the dip switches, see
Installing a media bay module in an expansion unit
For details about connecting the cables between the main unit and expansion units, you can also
see Connecting the expansion unit

To configure the MBM(s)

1 Open Element Manager and connect to your BCM50 system.
2 From the Configuration tab, click the Resources folder to expand it.
3 From the Resources folder, select Telephony Resources. See the figure
page on page 156.
Figure 64 Telephony Resources page
4 In the Modules section, select the expansion unit to configure.
NN40020-302
on page 156
on page 157
on page 157
on page 157
on page 157
on page 158
on page 104.
on page 100.
Telephony Resources