Removing An Internal Component - Nortel BCM50 3.0 Installation And Maintenance Manual

196 Chapter 24 Replacing an internal component
Figure 79 Remove the top of the case
6 Lift the top of the case off the BCM50 unit.
7 Proceed to

Removing an internal component

Use one of the following procedures to remove the component:
• To remove the hard disk
• To remove the fan
• To remove the router card
Warning: Protect the hardware components against damage from electrostatic
discharge. Always wear a ground wriststrap before you handle components. Always
place the components in static-free container.
NN40020-302
Removing an internal component
on page 197
on page 198
on page 199
on page 196.