This chapter shows you how to configure static routes for your Prestige.
14.1 Static Route Overview
Each remote node specifies only the network to which the gateway is directly connected, and
the Prestige has no knowledge of the networks beyond. For instance, the Prestige knows about
network N2 in the following figure through remote node router R1. However, the Prestige is
unable to route a packet to network N3 because it doesn't know that there is a route through the
same remote node router R1 (via gateway router R2). The static routes are for you to tell the
Prestige about the networks beyond the remote nodes.
Figure 112 Example of Static Routing Topology
14.2 IP Static Route Screen
Click the IP Static Route link under Management to open the IP Static Route screen. The
following screen displays.
Chapter 14 Static Route Screens
C
H A P T E R
Static Route Screens
P-334WT User's Guide
1 4
215