Summary: Any Ip Table - ZyXEL Communications P-334WT User Manual

Table 4 Screens Summary
LINK TAB
TMSS General
Exception List
Virus Protection
Parental Control
Port Isolation
Management
Static Route Static Route
Rules
Bandwidth Configuration
MGMT
Monitor
Remote MGMT WWW
TELNET
FTP
SNMP
DNS
Security
UPnP General
Maintenance
System General
Dynamic DNS
Time Setting
Logs View Log
Log Settings
Tools Firmware
Configuration
Restart

2.4.2 Summary: Any IP Table

Click the Any IP Table (Details...) hyperlink in the Status screen. The Any IP table shows
current read-only information (including the IP address and the MAC address) of all network
devices that use the Any IP feature to communicate with the Prestige.
Chapter 2 Introducing the Web Configurator
FUNCTION
Use this screen to enable or disable TMSS.
Use this screen to decide which computers in the network you can apply
TMSS.
Use this screen to check the computers in the network for Trend Micro
Internet Security.
Use this screen to allow a parent (LAN administrator) to control a LAN
user's Internet access privileges by blocking specified website categories.
Use this screen to decide in what situation a port will be separated from
other ports and/or allow the ports to bypass port isolation checking.
Use this screen to configure IP static routes.
Use this screen to enable bandwidth management on an interface and edit
a corresponding rule.
Use this screen to view the Prestige's bandwidth usage and allotments.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the Prestige.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the Prestige.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the Prestige.
Use this screen to configure your Prestige's settings for Simple Network
Management Protocol management.
Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the Prestige.
Use this screen to change your anti-probing settings.
Use this screen to enable UPnP on the Prestige.
This screen contains administrative.
Use this screen to set up dynamic DNS.
Use this screen to change your Prestige's time and date.
Use this screen to view the logs for the categories that you selected.
Use this screen to change your Prestige's log settings.
Use this screen to upload firmware to your Prestige.
Use this screen to backup and restore the configuration or reset the factory
defaults to your Prestige.
This screen allows you to reboot the Prestige without turning the power off.
P-334WT User's Guide
55