ZyXEL Communications P-334WT Quick Start Manual
ZyXEL Communications P-334WT Quick Start Manual

ZyXEL Communications P-334WT Quick Start Manual

802.11g wireless broadband router with firewall
Hide thumbs Also See for P-334WT:

Advertisement

P-334WT
802.11g Wireless Broadband Router with Firewall

Quick Start Guide

September 2004
Version 3.60

Advertisement

Table of Contents
loading

Summary of Contents for ZyXEL Communications P-334WT

  • Page 1: Quick Start Guide

    P-334WT 802.11g Wireless Broadband Router with Firewall Quick Start Guide September 2004 Version 3.60...
  • Page 2: Introducing The Prestige

    1. Go to www.zyxel.com. 2. Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3. Select the certification you wish to view from this page. P-334WT Internet Account Information Password: ____________...
  • Page 3: Hardware Installation

    After you’ve made the connections, connect the power cable to a power supply and look at the front panel LEDs. RESET You only need to use this button if you’ve forgotten the Prestige’s password. It returns the Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1. See your User’s Guide for details). P-334WT DESCRIPTION...
  • Page 4: Front Panel Leds

    Amber Green Blinking LAN 1- 4 Green Blinking Amber P-334WT DESCRIPTION The Prestige is not receiving power. Power to the Prestige is too low The Prestige is receiving power. The Prestige is performing testing. The LAN is not connected. The Prestige has a successful 10Mb Ethernet connection.
  • Page 5: Set Up Your Computer's Ip Address

    3.1 Windows 2000/NT/XP The following example figures use the default Windows XP GUI theme. 1. Click start (Start in Windows 2000/NT), Settings, Control Panel. P-334WT DESCRIPTION The Prestige is sending/receiving data The WAN connection is not ready, or has failed.
  • Page 6: Control Panel

    P-334WT 2. In the Control Panel, double-click Network 3. Right-click Local Area Connection and then Properties. Connections (Network and Dial-up Connections in Windows 2000/NT). Control Panel Network Connection...
  • Page 7: Local Area Connection Properties

    8. Remove any previously installed gateways in the IP Settings tab and click OK to go back to the Internet Protocol TCP/IP Properties screen. See the appendices for information on configuring DNS server addresses. P-334WT 5. Select Use the following IP Address and fill in an IP address (between 192.168.1.3 and 192.168.1.254).
  • Page 8: Checking/Updating Your Computer's Ip Address

    3.3 Testing the Connection to the Prestige 1. Click Start, (All) Programs, Accessories and then Command Prompt. 2. In the Command Prompt window, type "ping 192.168.1.1” followed by a space and the IP address of the Prestige (192.168.1.2 is the default). P-334WT No gateways configured.
  • Page 9: Configuring Your Prestige

    The default password (“1234”) is already in the password field (in non-readable format). Click Login to proceed to a screen asking you to change your password. Click Reset to revert to the default password in the password field. P-334WT 10ms, Average = Web site address.
  • Page 10 Click the BM SETUP to begin a series of screens to help you configure media bandwidth management on your Prestige. Click a link under MAIN MENU in the navigation panel to configure that Prestige feature. P-334WT Default password. log in.
  • Page 11: Internet Access Using The Wizard

    Next Click Next to continue to the next screen. No configuration changes will be saved to the Prestige until you click Finish. Click Wizard Setup in the main menu to display the first wizard screen. P-334WT WIZARD BANDWIDTH MANAGEMENT WIZARD...
  • Page 12 PSK (if WPA-PSK is enabled), WEP encryption key (if WEP is enabled) for wireless Choose Basic(WEP) security in the previous screen to setup WEP Encryption parameters. P-334WT System Name is a unique name to identify the Prestige in an Ethernet network.
  • Page 13 Choose Extend(WPA-PSK) security in the second wizard screen to set up a Pre-Shared Key. This wizard screen has three variations depending on what encapsulation type you use. Use the information in Internet Account Information to fill in fields. P-334WT WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless network.
  • Page 14 Click Next to continue. This is the fourth wizard screen you need to configure. Fill in the fields and click Next to go to the last wizard screen. P-334WT Choose Ethernet when the WAN port is used as a regular Ethernet. Choose from Standard, Telia Login or a RoadRunner version.
  • Page 15 Click Next to continue. This is the final wizard screen you need to configure. Select the Yes radio button and click Finish to enable One-Touch Intelligent Security Technology (OTIST). P-334WT WAN IP Address Assignment Select Get automatically from ISP if your ISP did not assign you a fixed IP address.
  • Page 16 User’s Guide for your wireless adapter. 4.3 Using the Bandwidth Management Wizard Click BM SETUP in the main menu to display the first wizard screen. P-334WT OTIST Security You can assign the Prestige wireless security settings (SSID and either the WEP or WPA-PSK) to a ZyXEL wireless client that also supports OTIST.
  • Page 17 Use the second wizard screen to select the services that you want to apply bandwidth management. The third wizard screen allows you to setup priorities for the services listed. P-334WT Select the Active check box to have the Prestige apply bandwidth...
  • Page 18: Test Your Internet Connection

    Cannot access the Check the cable connection between the Prestige and your computer or hub. Refer to the P-334WT Select High, Mid or Low priority for each service to have your Prestige limit the bandwidth used by bandwidth-hungry...
  • Page 19 If the ISP checks the user ID, click WAN and then the ISP tab. Check your service type, user name, and password. Cannot access the Check the Prestige’s connection to the cable/DSL device. Internet. Check whether your cable/DSL device requires a crossover or straight-through cable. Click WAN to verify your settings. P-334WT CORRECTIVE ACTION...

Table of Contents