C
H A P T E R
This chapter shows you how to configure static routes for your NBG318S.
16.1 Static Route Overview
Each remote node specifies only the network to which the gateway is directly connected, and
the NBG318S has no knowledge of the networks beyond. For instance, the NBG318S knows
about network N2 in the following figure through remote node router R1. However, the
NBG318S is unable to route a packet to network N3 because it doesn't know that there is a
route through the same remote node router R1 (via gateway router R2). The static routes are
for you to tell the NBG318S about the networks beyond the remote nodes.
Figure 87 Example of Static Routing Topology
16.2 IP Static Route Screen
Click Management > Static Route to open the IP Static Route screen. The following screen
displays.
NBG318S User's Guide
Static Route Screens
16
163