Chapter 23 Menu 2 Wan Setup; Wan Setup; Figure 149 Menu 2 Wan Setu; Table 114 Menu 2 Wan Setup - ZyXEL Communications P-334WT User Manual

This chapter describes how to configure the WAN using menu 2.

23.1 WAN Setup

From the main menu, enter 2 to open menu 2.

Figure 149 Menu 2 WAN Setu

The following table describes the fields in this menu.

Table 114 Menu 2 WAN Setup

FIELD
MAC Address
Assigned By
WAN MAC
Address
IP Address
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

Chapter 23 Menu 2 WAN Setup

Menu 2 WAN Setup
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
WAN MAC Address: N/A
IP Address= N/A
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to choose one of three methods to assign
a MAC Address. Choose Factory default to select the factory assigned default
MAC Address. Choose IP address attached on LAN to use the MAC Address of
that computer whose IP you give in the IP Address field. Choose Assign MAC
address to use the MAC Address you configure in the WAN MAC Address field.
This field is applicable only if you choose the Assign MAC address method in the
Assigned By field. Enter the MAC address you want to use.
This field is applicable only if you choose the IP address attached on LAN
method in the Assigned By field. Enter the IP address of the computer on the
LAN whose MAC you are cloning.
C
H A P T E R
P-334WT User's Guide
2 3
277