ZyXEL Communications P-334WT User Manual page 255

Table 104 Time Setting
LABEL
New Time
(hh:mm:ss)
New Date
(yyyy-mm-dd)
Get from Time
Server
Time Protocol
Time Server
Address
Current Time
New Time
Current Date
New Date
Time Zone Setup
Enable Daylight
Saving
Chapter 18 System
DESCRIPTION
This field displays the last updated time from the time server or the last time
configured manually.
When you set Time and Date Setup to Manual, enter the new time in this field
and then click Apply.
This field displays the last updated date from the time server or the last date
configured manually.
When you set Time and Date Setup to Manual, enter the new date in this field
and then click Apply.
Select this radio button to have the Prestige get the time and date from the time
server you specified below.
Select the time service protocol that your time server uses. Not all time servers
support all protocols, so you may have to check with your ISP/network
administrator or use trial and error to find a protocol that works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC 868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
The default, NTP (RFC 1305), is similar to Time (RFC 868).
Select None to enter the time and date manually.
Enter the IP address or URL (up to 20 extended ASCII characters in length) of
your time server. Check with your ISP/network administrator if you are unsure of
this information.
This field displays the time of your Prestige.
Each time you reload this page, the Prestige synchronizes the time with the time
server.
This field displays the last updated time from the time server.
When you select None in the Time Protocol field, enter the new time in this
field and then click Apply.
This field displays the date of your Prestige.
Each time you reload this page, the Prestige synchronizes the time with the time
server.
This field displays the last updated date from the time server.
When you select None in the Time Protocol field, enter the new date in this
field and then click Apply.
Daylight saving is a period from late spring to early fall when many countries set
their clocks ahead of normal local time by one hour to give more daytime light in
the evening.
Select this option if you use Daylight Saving Time.
P-334WT User's Guide
255