38.4.1 Active Protocol
This field is a combination of mode and security protocols used for the VPN. See the Web
Configurator part on VPN for more information on these parameters.
Table 159 Active Protocol: Encapsulation and Security Protocol
MODE
Tunnel
Transport
38.4.2 Security Parameter Index (SPI)
To edit this menu, move the cursor to the Edit Manual Setup field in Menu 27.1.1 – IPSec
Setup press [SPACE BAR] to select Yes and then press [ENTER] to go to Menu 27.1.1.2 –
Manual Setup.
Figure 243 Menu 27.1.1.2 Manual Setup
The following table describes the fields in this menu.
Table 160 Menu 27.1.1.2 Manual Setup
FIELD
Active Protocol Press [SPACE BAR] to choose from ESP Tunnel, ESP Transport, AH Tunnel or AH
ESP Setup
SPI (Decimal)
Chapter 38 VPN/IPSec Setup
SECURITY PROTOCOL
ESP
AH
Menu 27.1.1.2 – Manual Setup
Active Protocol= ESP Tunnel
ESP Setup
SPI (Decimal)=
Encryption Algorithm= DES
Key1=
Key2= N/A
Key3= N/A
Authentication Algorithm= MD5
Key= N/A
AH Setup
SPI (Decimal)= N/A
Authentication Algorithm= N/A
Key=
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Transport and then press [ENTER]. Choosing an ESP combination causes the AH
Setup fields to be non-applicable (N/A)
The ESP Setup fields are N/A if you chose an AH Active Protocol.
The SPI must be unique and from one to four integers ("0" to "9").
P-334WT User's Guide
385