Installing Upnp In Windows Example; Installing Upnp In Windows Me - ZyXEL Communications P-334WT User Manual

Table 101 Configuring UPnP
LABEL
Allow UPnP to pass
through Firewall
Apply
Reset

17.4 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.

17.4.1 Installing UPnP in Windows Me

Follow the steps below to install UPnP in Windows Me.
1 Click Start and Control Panel. Double-
click Add/Remove Programs.
2 Click on the Windows Setup tab and
select Communication in the
Components selection box. Click
Details.
Chapter 17 UPnP
DESCRIPTION
UPnP broadcasts are only allowed on the LAN. If you block LAN-to-LAN/
Prestige traffic using the firewall, then you need to select this check box to allow
UPnP-enabled traffic to pass through the firewall.
This setting remains active until you disable UPnP.
Clear this check box if you do not want to create a hole in the firewall for UPnP
application packets (for example, MSN packets).
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
P-334WT User's Guide
243